dmesg - Hygon C86 3250 8-core - PANGU 4GB - THTF ChaoXiang
Linux version 5.4.18-85-generic (buildd@9bd463201697) (gcc version 9.4.0 (Ubuntu 9.4.0-1kylin1~20.04.1)) #74-KYLINOS SMP Fri Mar 24 11:20:42 UTC 2023 (KYLINOS 5.4.18-85.74-generic 5.4.18-85)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007b442fff] usable
BIOS-e820: [mem 0x000000007b443000-0x000000007b73ffff] reserved
BIOS-e820: [mem 0x000000007b740000-0x000000007b743fff] ACPI NVS
BIOS-e820: [mem 0x000000007b744000-0x000000007b744fff] reserved
BIOS-e820: [mem 0x000000007b745000-0x000000007b74afff] ACPI NVS
BIOS-e820: [mem 0x000000007b74b000-0x000000007b74bfff] reserved
BIOS-e820: [mem 0x000000007b74c000-0x000000007b8ccfff] ACPI NVS
BIOS-e820: [mem 0x000000007b8cd000-0x000000007b912fff] ACPI data
BIOS-e820: [mem 0x000000007b913000-0x000000007befefff] usable
BIOS-e820: [mem 0x000000007beff000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047f37ffff] usable
BIOS-e820: [mem 0x000000047f380000-0x000000047fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0x4b2f9018-0x4b308e57] usable ==> usable
e820: update [mem 0x4b2f9018-0x4b308e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000004b2f9017] usable
reserve setup_data: [mem 0x000000004b2f9018-0x000000004b308e57] usable
reserve setup_data: [mem 0x000000004b308e58-0x000000007b442fff] usable
reserve setup_data: [mem 0x000000007b443000-0x000000007b73ffff] reserved
reserve setup_data: [mem 0x000000007b740000-0x000000007b743fff] ACPI NVS
reserve setup_data: [mem 0x000000007b744000-0x000000007b744fff] reserved
reserve setup_data: [mem 0x000000007b745000-0x000000007b74afff] ACPI NVS
reserve setup_data: [mem 0x000000007b74b000-0x000000007b74bfff] reserved
reserve setup_data: [mem 0x000000007b74c000-0x000000007b8ccfff] ACPI NVS
reserve setup_data: [mem 0x000000007b8cd000-0x000000007b912fff] ACPI data
reserve setup_data: [mem 0x000000007b913000-0x000000007befefff] usable
reserve setup_data: [mem 0x000000007beff000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000047f37ffff] usable
reserve setup_data: [mem 0x000000047f380000-0x000000047fffffff] reserved
efi: EFI v2.60 by Byosoft
efi: ACPI=0x7b912000 ACPI 2.0=0x7b912014 SMBIOS=0x7b73a000 MEMATTR=0x7894f018
secureboot: Secure boot disabled
SMBIOS 3.1 present.
DMI: THTF ChaoXiang Series/THTF-HG3250-1W-MH3A, BIOS BA1.H1.ZT.019.220314.R 03/14/2022
tsc: Fast TSC calibration using PIT
tsc: Detected 2794.698 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x47f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 0000FF000000 mask FFFFFF000000 write-protect
2 base 00007C000000 mask FFFFFC000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000480000000 aka 18432M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7beff max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x238001000, 0x238001fff] PGTABLE
BRK [0x238002000, 0x238002fff] PGTABLE
BRK [0x238003000, 0x238003fff] PGTABLE
BRK [0x238004000, 0x238004fff] PGTABLE
BRK [0x238005000, 0x238005fff] PGTABLE
BRK [0x238006000, 0x238006fff] PGTABLE
BRK [0x238007000, 0x238007fff] PGTABLE
BRK [0x238008000, 0x238008fff] PGTABLE
BRK [0x238009000, 0x238009fff] PGTABLE
BRK [0x23800a000, 0x23800afff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x3b1f7000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B912014 000024 (v02 _BYO_ )
ACPI: XSDT 0x000000007B9110E8 000094 (v01 _BYO_ BYOSOFT 00000002 BYO 01000013)
ACPI: FACP 0x000000007B8FE000 000114 (v06 _BYO_ BYOSOFT 00000002 BYO 204F5942)
ACPI: DSDT 0x000000007B8F1000 00B2EA (v02 _BYO_ Higon 00000001 INTL 20190215)
ACPI: FACS 0x000000007B78F000 000040
ACPI: SLIC 0x000000007B910000 000176 (v01 THTFPC TONGFANG 00000015 BYO 00000001)
ACPI: SSDT 0x000000007B900000 0001FC (v02 _BYO_ BYOSOFT 00000002 BYO 204F5942)
ACPI: SSDT 0x000000007B904000 002314 (v01 HIGON HGN CPU 00000001 HYGN 00000001)
ACPI: CRAT 0x000000007B903000 000F50 (v01 HIGON HGN CRAT 00000001 HYGN 00000001)
ACPI: CDIT 0x000000007B902000 000029 (v01 HIGON HGN CDIT 00000001 HYGN 00000001)
ACPI: UEFI 0x000000007B8AD000 000042 (v01 _BYO_ BYOSOFT 00000002 BYO 01000013)
ACPI: APIC 0x000000007B901000 0000DE (v03 _BYO_ BYOSOFT 00000002 BYO 204F5942)
ACPI: SSDT 0x000000007B907000 008C4C (v02 HIGON HGN ALIB 00000002 MSFT 04000000)
ACPI: MCFG 0x000000007B8FF000 00003C (v01 _BYO_ BYOSOFT 00000002 BYO 204F5942)
ACPI: HPET 0x000000007B8FD000 000038 (v01 _BYO_ BYOSOFT 00000002 BYO 204F5942)
ACPI: IVRS 0x000000007B8F0000 0000D0 (v02 HIGON HGN IVRS 00000001 HYGN 00000000)
ACPI: FPDT 0x000000007B8EF000 000044 (v01 _BYO_ BYOSOFT 00000002 BYO 01000013)
ACPI: SSDT 0x000000007B8ED000 00177F (v01 Hygon CPMCMN 00000001 INTL 20190215)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047f37ffff]
NODE_DATA(0) allocated [mem 0x47f355000-0x47f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007b442fff]
node 0: [mem 0x000000007b913000-0x000000007befefff]
node 0: [mem 0x0000000100000000-0x000000047f37ffff]
Zeroed struct page in unavailable ranges: 17972 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000047f37ffff]
On node 0 totalpages: 4173132
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7849 pages used for memmap
DMA32 zone: 502319 pages, LIFO batch:63
Normal zone: 57294 pages used for memmap
Normal zone: 3666816 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 129, version 33, address 0xefef0000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x4b2f9000-0x4b2f9fff]
PM: Registered nosave memory: [mem 0x4b308000-0x4b308fff]
PM: Registered nosave memory: [mem 0x7b443000-0x7b73ffff]
PM: Registered nosave memory: [mem 0x7b740000-0x7b743fff]
PM: Registered nosave memory: [mem 0x7b744000-0x7b744fff]
PM: Registered nosave memory: [mem 0x7b745000-0x7b74afff]
PM: Registered nosave memory: [mem 0x7b74b000-0x7b74bfff]
PM: Registered nosave memory: [mem 0x7b74c000-0x7b8ccfff]
PM: Registered nosave memory: [mem 0x7b8cd000-0x7b912fff]
PM: Registered nosave memory: [mem 0x7beff000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 4107904
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16151292K/16692528K available (14339K kernel code, 2457K rwdata, 7384K rodata, 2756K init, 6936K bss, 541236K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 46315 entries in 181 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2848b044db8, max_idle_ns: 440795246721 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.39 BogoMIPS (lpj=11178792)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
KYSEC: Initializing.
KYSEC: devinfo: devlist init finished
KYSEC: Initialized successfully.
Box: Initializing.
Box : Initialized successfully.
KYEXTEND: Initialized successfully.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Hygon C86 3250 8-core Processor (family: 0x18, model: 0x1, stepping: 0x1)
Performance Events: Fam18h core perfctr, HYGON PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (89430.33 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7b740000-0x7b743fff] (16384 bytes)
PM: Registering ACPI NVS region [mem 0x7b745000-0x7b74afff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0x7b74c000-0x7b8ccfff] (1576960 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:12:51, date: 2024-10-31
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1730383971.176:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xea000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0x480000000-0x7fcffffffff window]
pci_bus 0000:00: root bus resource [bus 00-7f]
pci 0000:00:00.0: [1d94:1450] type 00 class 0x060000
pci 0000:00:00.2: [1d94:1451] type 00 class 0x080600
pci 0000:00:01.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:01.5: [1d94:1453] type 01 class 0x060400
pci 0000:00:01.5: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:03.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:03.1: [1d94:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:07.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:07.1: [1d94:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1d94:1452] type 00 class 0x060000
pci 0000:00:08.1: [1d94:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1d94:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1d94:790e] type 00 class 0x060100
pci 0000:00:18.0: [1d94:1460] type 00 class 0x060000
pci 0000:00:18.1: [1d94:1461] type 00 class 0x060000
pci 0000:00:18.2: [1d94:1462] type 00 class 0x060000
pci 0000:00:18.3: [1d94:1463] type 00 class 0x060000
pci 0000:00:18.4: [1d94:1464] type 00 class 0x060000
pci 0000:00:18.5: [1d94:1465] type 00 class 0x060000
pci 0000:00:18.6: [1d94:1466] type 00 class 0x060000
pci 0000:00:18.7: [1d94:1467] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:01:00.0: reg 0x18: [mem 0xed604000-0xed604fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xed600000-0xed603fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.5: PCI bridge to [bus 01]
pci 0000:00:01.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.5: bridge window [mem 0xed600000-0xed6fffff]
pci 0000:02:00.0: [1eed:1350] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0x7fce0000000-0x7fcefffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0x7fcf0000000-0x7fcf00fffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xed000000-0xed0fffff pref]
pci 0000:02:00.0: BAR 2: assigned to efifb
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8 GT/s x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:02:00.1: [1eed:1811] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xecffffff 64bit]
pci 0000:02:00.1: supports D1
pci 0000:02:00.1: PME# supported from D0 D1 D3hot
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [mem 0xea000000-0xed0fffff]
pci 0000:00:03.1: bridge window [mem 0x7fce0000000-0x7fcf00fffff 64bit pref]
pci 0000:03:00.0: [1d94:145a] type 00 class 0x130000
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.2: [1d94:1456] type 00 class 0x108000
pci 0000:03:00.2: reg 0x18: [mem 0xed400000-0xed4fffff]
pci 0000:03:00.2: reg 0x24: [mem 0xed500000-0xed501fff]
pci 0000:03:00.2: enabling Extended Tags
pci 0000:03:00.3: [1d94:145f] type 00 class 0x0c0330
pci 0000:03:00.3: reg 0x10: [mem 0xed300000-0xed3fffff 64bit]
pci 0000:03:00.3: enabling Extended Tags
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 03]
pci 0000:00:07.1: bridge window [mem 0xed300000-0xed5fffff]
pci 0000:04:00.0: [1d94:1455] type 00 class 0x130000
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.1: [1d94:1468] type 00 class 0x108000
pci 0000:04:00.1: reg 0x18: [mem 0xed100000-0xed1fffff]
pci 0000:04:00.1: reg 0x24: [mem 0xed200000-0xed201fff]
pci 0000:04:00.1: enabling Extended Tags
pci 0000:04:00.2: [1d94:7901] type 00 class 0x010601
pci 0000:04:00.2: reg 0x24: [mem 0xed202000-0xed202fff]
pci 0000:04:00.2: enabling Extended Tags
pci 0000:04:00.2: PME# supported from D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 04]
pci 0000:00:08.1: bridge window [mem 0xed100000-0xed2fffff]
pci_bus 0000:00: on NUMA node 0
iommu: Default domain type: Translated
libata version 3.00 loaded.
SCSI subsystem initialized
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
pci 0000:02:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x4b2f9018-0x4bffffff]
e820: reserve RAM buffer [mem 0x7b443000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7beff000-0x7bffffff]
e820: reserve RAM buffer [mem 0x47f380000-0x47fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Init box entries under sysfs SUCCESS!
KYSEC: Init kysecfs SUCCESS!
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfec01000-0xfec01fff] has been reserved
system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.5: PCI bridge to [bus 01]
pci 0000:00:01.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.5: bridge window [mem 0xed600000-0xed6fffff]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [mem 0xea000000-0xed0fffff]
pci 0000:00:03.1: bridge window [mem 0x7fce0000000-0x7fcf00fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 03]
pci 0000:00:07.1: bridge window [mem 0xed300000-0xed5fffff]
pci 0000:00:08.1: PCI bridge to [bus 04]
pci 0000:00:08.1: bridge window [mem 0xed100000-0xed2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xea000000-0xefffffff window]
pci_bus 0000:00: resource 11 [mem 0x480000000-0x7fcffffffff window]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xed600000-0xed6fffff]
pci_bus 0000:02: resource 1 [mem 0xea000000-0xed0fffff]
pci_bus 0000:02: resource 2 [mem 0x7fce0000000-0x7fcf00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xed300000-0xed5fffff]
pci_bus 0000:04: resource 1 [mem 0xed100000-0xed2fffff]
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 79900K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.5: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:07.0: Adding to iommu group 6
pci 0000:00:07.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:02:00.0: Adding to iommu group 13
pci 0000:02:00.1: Adding to iommu group 13
pci 0000:03:00.0: Adding to iommu group 14
pci 0000:03:00.2: Adding to iommu group 15
pci 0000:03:00.3: Adding to iommu group 16
pci 0000:04:00.0: Adding to iommu group 17
pci 0000:04:00.1: Adding to iommu group 18
pci 0000:04:00.2: Adding to iommu group 19
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: HYGON NB counters detected
amd_uncore: HYGON LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
io scheduler bfq registered
pcieport 0000:00:01.5: PME: Signaling with IRQ 26
pcieport 0000:00:01.5: AER: enabled with IRQ 26
pcieport 0000:00:01.5: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+
pcieport 0000:00:03.1: PME: Signaling with IRQ 27
pcieport 0000:00:03.1: AER: enabled with IRQ 27
pcieport 0000:00:03.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+
pcieport 0000:00:07.1: PME: Signaling with IRQ 28
pcieport 0000:00:07.1: AER: enabled with IRQ 28
pcieport 0000:00:08.1: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 30
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x7fce0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: \_SB_.C000: Found 2 idle states
ACPI: \_SB_.C002: Found 2 idle states
ACPI: \_SB_.C004: Found 2 idle states
ACPI: \_SB_.C006: Found 2 idle states
ACPI: \_SB_.C008: Found 2 idle states
ACPI: \_SB_.C00A: Found 2 idle states
ACPI: \_SB_.C00C: Found 2 idle states
ACPI: \_SB_.C00E: Found 2 idle states
ACPI: \_SB_.C001: Found 2 idle states
ACPI: \_SB_.C003: Found 2 idle states
ACPI: \_SB_.C005: Found 2 idle states
ACPI: \_SB_.C007: Found 2 idle states
ACPI: \_SB_.C009: Found 2 idle states
ACPI: \_SB_.C00B: Found 2 idle states
ACPI: \_SB_.C00D: Found 2 idle states
ACPI: \_SB_.C00F: Found 2 idle states
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.3: xHCI Host Controller
xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.3: hcc params 0x0270fe65 hci version 0x110 quirks 0x0000000000000010
xhci_hcd 0000:03:00.3: xHCI Host Controller
xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.3: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.18-85-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.18-85-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2024-10-31T14:12:51 UTC (1730383971)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (642014577, 77793543)->(721617865, -1809745)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8ad545aef81246992759a91c3262186e14fb67f5'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:9:234
acpi device:4e: hash matches
memory memory112: hash matches
acpi_cpufreq: overriding BIOS provided _PSD data
ALSA device list:
No soundcards found.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2756K
Write protecting the kernel read-only data: 24576k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 808K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
r8168: loading out-of-tree module taints kernel.
r8168: module verification failed: signature and/or required key missing - tainting kernel
r8168 Gigabit Ethernet driver 8.048.00-NAPI loaded
r8168 0000:01:00.0: enabling device (0000 -> 0003)
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2019 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
ahci 0000:04:00.2: version 3.0
ahci 0000:04:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x80 impl SATA mode
ahci 0000:04:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata7: DUMMY
ata8: SATA max UDMA/133 abar m4096@0xed202000 port 0xed202480 irq 50
xdxgpu 0000:02:00.0: xdxgpu: Pangu B0 Graphics detected
xdxgpu 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xea000000 -> 0xebffffff
xdxgpu 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 2: 0x7fce0000000 -> 0x7fcefffffff
xdxgpu 0000:02:00.0: remove_conflicting_pci_framebuffers: bar 4: 0x7fcf0000000 -> 0x7fcf00fffff
checking generic (7fce0000000 300000) vs hw (ea000000 2000000)
checking generic (7fce0000000 300000) vs hw (7fce0000000 10000000)
fb0: switching to xdxgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
xdxgpu 0000:02:00.0: vgaarb: deactivate vga console
xdxgpu 0000:02:00.0: BAR 2: releasing [mem 0x7fce0000000-0x7fcefffffff 64bit pref]
xdxgpu 0000:02:00.0: BAR 4: releasing [mem 0x7fcf0000000-0x7fcf00fffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: releasing [mem 0x7fce0000000-0x7fcf00fffff 64bit pref]
pcieport 0000:00:03.1: BAR 15: assigned [mem 0x480000000-0x5ffffffff 64bit pref]
xdxgpu 0000:02:00.0: BAR 2: assigned [mem 0x500000000-0x5ffffffff 64bit pref]
xdxgpu 0000:02:00.0: BAR 4: assigned [mem 0x480000000-0x4800fffff 64bit pref]
pcieport 0000:00:03.1: PCI bridge to [bus 02]
pcieport 0000:00:03.1: bridge window [mem 0xea000000-0xed0fffff]
pcieport 0000:00:03.1: bridge window [mem 0x480000000-0x5ffffffff 64bit pref]
xdxgpu 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 0
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 1
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 2
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 3
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 4
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 5
xdxgpu 0000:02:00.0: xdxgpu: add ip block number 6
xdxgpu 0000:02:00.0: xdxgpu: initializing device (0x1EED:0x1350 0x1EED:0x1000 0x01).
xdxgpu 0000:02:00.0: xdxgpu: nvec = 40
xdxgpu 0000:02:00.0: xdxgpu: irq initialized, msix interrupt enabled
xdxgpu 0000:02:00.0: xdxgpu: irq initialized, msi software dispatch interrupt disabled
Debug: xdev->rmmio address:0xffff9c9f9da3e108 value:0xffffbc4582000000
xdxgpu 0000:02:00.0: xdxgpu: register mmio base: 0x00000000ea000000
xdxgpu 0000:02:00.0: xdxgpu: register mmio size: 32M
xdxgpu 0000:02:00.0: xdxgpu: visable vram base: 0x0000000500000000
xdxgpu 0000:02:00.0: xdxgpu: visable vram size: 4096M
xdxgpu 0000:02:00.0: xdxgpu: B0 ch_info=0x0
xdxgpu 0000:02:00.0: xdxgpu: B0 dev_id=0x1350
xdxgpu 0000:02:00.0: xdxgpu: dc_num=1
xdxgpu 0000:02:00.0: xdxgpu: GPU Multi-Core Config: core0 0x0, core1 0x0, core2 0x7, core3 0x7
xdxgpu 0000:02:00.0: xdxgpu: GPU: primary id: 0, core count 2
xdxgpu 0000:02:00.0: xdxgpu: gddr_mask_tmp=1, channel_no=1
xdxgpu 0000:02:00.0: xdxgpu: gddr_mask_tmp=0, channel_no=2
xdxgpu 0000:02:00.0: xdxgpu: gddr_mask_tmp=0, channel_no=2
xdxgpu 0000:02:00.0: xdxgpu: gddr_mask_tmp=0, channel_no=2
xdxgpu 0000:02:00.0: xdxgpu: gddr_mask=3, interleave=2, gddr_die_size=2GB
xdxgpu 0000:02:00.0: xdxgpu: gddr_total_size=4GB, channel_no=2, xdev->vram_size=100000000
xdxgpu 0000:02:00.0: xdxgpu: VRAM: 4096M 0x0000000100000000 - 0x00000001FBFFFFFF (4032M used)
xdxgpu 0000:02:00.0: xdxgpu: Visable VRAM: 4096M 0x0000000500000000 - 0x00000005FFFFFFFF (4032M used)
xdxgpu 0000:02:00.0: xdxgpu: xdxgpu public firware info init
xdxgpu 0000:02:00.0: xdxgpu: acpu init start
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 12
xdxgpu 0000:02:00.0: xdxgpu: default runtime ACPU Capability fwcap: 0x0.
xdxgpu 0000:02:00.0: xdxgpu: runtime ACPU Capability fwcap: 0x1e24700000001.
xdxgpu 0000:02:00.0: xdxgpu: runtime ACPU fwcntl: 0x11.
xdxgpu 0000:02:00.0: xdxgpu: acpu init success
xdxgpu 0000:02:00.0: xdxgpu: visable heap: sStartAddr 0x0000000500000000, sCardBase 0x0000000100000000, uiSize 3360M
xdxgpu 0000:02:00.0: xdxgpu: MMU heap: sStartAddr 0x00000005FA000000, sCardBase 0x00000001FA000000, uiSize 32M
xdxgpu 0000:02:00.0: xdxgpu: DC heap: sStartAddr 0x00000005D2000000, sCardBase 0x00000001D2000000, uiSize 640M
xdxgpu 0000:02:00.0: xdxgpu: system heap: sStartAddr 0x0000000000000000, sCardBase 0x0000008000000000, uiSize 0M
xdxgpu 0000:02:00.0: xdxgpu: shareram heap: sStartAddr 0x0000000480000000, sCardBase 0x0000000090000000, uiSize 0M
PVR_K: 230: Read BVNC 35.4.1632.23 from HW device registers
PVR_K: 230: RGX Device registered BVNC 35.4.1632.23 with 2 cores in the system
PVR_K:(Error): 230: AcquireIommuInfo dma is iommu!! [3352]
xdxgpu 0000:02:00.0: xdxgpu: DVFS supported, device ID: 0x1350
xdxgpu 0000:02:00.0: xdxgpu: SMMU init tcu:0 base_offset:29000000
xdxgpu 0000:02:00.0: xdxgpu: SMMU xdx_smmu_tcu_init() 377:SMMU tcu_idx:0 tbu_cnt:2.
xdxgpu 0000:02:00.0: xdxgpu: SMMU xdx_smmu_creat_group() 617:Creat SMMU group:0 success.
xdxgpu 0000:02:00.0: xdxgpu: SMMU dev init success.
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 4
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 7
r8168 0000:01:00.0 enp1s0: renamed from eth0
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 9
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 6
xdxgpu: [hantro_vcmd_probe]4932 sku:1350
xdxgpu: [hantro_vcmd_probe]4932 sku:1350
xdxgpu: Init: vcmd_buf_mem_pool.busAddress=0x500402000.
xdxgpu: Init: vcmd_buf_mem_pool.virtualAddress=0xffffbc4584a00000.
xdxgpu: Init: vcmd_status_buf_mem_pool.busAddress=0x500602000.
xdxgpu: Init: vcmd_status_buf_mem_pool.virtualAddress=0xffffbc4585200000.
xdxgpu: Init: vcmd_registers_mem_pool.busAddress=0x500802000.
xdxgpu: Init: vcmd_registers_mem_pool.virtualAddress=0xffffbc4586000000.
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: IRQ not in use!
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 0:0x90011030
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 50:0x03da1000
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 54:0x01da0440
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 56:0x48800870
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 309:0x1fc7
xdxgpu: Init: vcmd_buf_mem_pool.busAddress=0x500d02000.
xdxgpu: Init: vcmd_buf_mem_pool.virtualAddress=0xffffbc4586600000.
xdxgpu: Init: vcmd_status_buf_mem_pool.busAddress=0x500f02000.
xdxgpu: Init: vcmd_status_buf_mem_pool.virtualAddress=0xffffbc4586e00000.
xdxgpu: Init: vcmd_registers_mem_pool.busAddress=0x501102000.
xdxgpu: Init: vcmd_registers_mem_pool.virtualAddress=0xffffbc4590800000.
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: IRQ not in use!
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 0:0x90008200
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 80:0x98d7c0f0
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 214:0x481e0800
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 226:0x8a19a99
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 287:0x40e28000
xdxgpu 0000:02:00.0: xdxgpu: vcmd_driver: main module register 509:0x2117
xdxgpu 0000:02:00.0: xdxgpu: VPU device created
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 2
xdx-dma xdxVdmaB0.0.auto: xdxgpu: xdx_dma_map.devname = xdxVdmaB0.0.auto
xdx-dma xdxVdmaB0.0.auto: xdxgpu: device:xdxVdmaB0.0.auto registered.
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 13
xdx-dma xdxTdmaB0.1.auto: xdxgpu: xdx_dma_map.devname = xdxTdmaB0.1.auto
xdx-dma xdxTdmaB0.1.auto: xdxgpu: device:xdxTdmaB0.1.auto registered.
xdxgpu 0000:02:00.0: xdxgpu: xdxdma B0 dev init start
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 14
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 15
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 3
xdxgpu: XDX_HDMI_AUDIO: xdx_vaudio[0x1eed:0x1101]
xdxgpu 0000:02:00.0: xdxgpu: pm init
xdxgpu 0000:02:00.0: xdxgpu: slowdown_temp 90 hyst 2 device_id 1350
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 11
PVR_K: 230: AXI fabric coherency (RGX_CR_SOC_AXI): 0xc
PVR_K: 230: DeviceCacheSnoopingMode 0, DevFabricType 0
PVR_K: 230: RGX Firmware image 'rgx.fw.35.4.1632.23' loaded
xdxgpu 0000:02:00.0: xdxgpu: register irq handle for source 0
PVR_K: 230: Shader binary image 'rgx.sh.35.4.1632.23' loaded
xdx-dma xdxTdmaB0.1.auto: xdx_tdma(xdxTdmaB0.1.auto) = 0xffff9c9f9b78ac10
xdx-dma xdxTdmaB0.1.auto: Tdma chan id = 0
xdx-dma xdxVdmaB0.0.auto: xdx_dma(xdxVdmaB0.0.auto) = 0xffff9c9f9b78c010
PVR_K: 230: (WARN) RGXDevInitCompatCheck: Different driver DDK build version (466450) / Firmware DDK build version (928787).
fbcon: xdxgpudrmfb (fb0) is primary device
xdxgpu 0000:02:00.0: xdxgpu: doorbell allocate:device node:ffff9c9fac8b0000 devinfo:ffff9c9f9b5ec008
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=31b2, idProduct=0011, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: KT_USB_AUDIO
usb 1-1: Manufacturer: KTMicro
usb 1-1: SerialNumber: 214b206000000178
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: KTMicro KT_USB_AUDIO as /devices/pci0000:00/0000:00:07.1/0000:03:00.3/usb1/1-1/1-1:1.3/0003:31B2:0011.0001/input/input2
Console: switching to colour frame buffer device 240x67
xdxgpu 0000:02:00.0: fb0: xdxgpudrmfb frame buffer device
[drm] Initialized xdxgpu 1.0.0 20220114 for 0000:02:00.0 on minor 0
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
hid-generic 0003:31B2:0011.0001: input,hidraw0: USB HID v1.10 Device [KTMicro KT_USB_AUDIO] on usb-0000:03:00.3-1/input3
usb 2-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 6.20
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
usb 2-2: SerialNumber: 000000000
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: ATA-10: KINGSTON SA400S37480G, SBFK66.5, max UDMA/133
ata8.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA KINGSTON SA400S3 66.5 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
sda: sda1 sda2 sda3 sda4 sda5 sda6
blk_init ok, step 10, over 30
sd 7:0:0:0: [sda] Attached SCSI disk
blk load period jiffies over
usb 1-2: new high-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 6.20
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: VIA Labs, Inc.
usb 1-2: SerialNumber: 000000000
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
tsc: Refined TSC clocksource calibration: 2794.749 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2848e035793, max_idle_ns: 440795248209 ns
clocksource: Switched to clocksource tsc
EXT4-fs (sda3): re-mounted. Opts: (null)
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 2-4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 6.20
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: USB3.0 Hub
usb 2-4: Manufacturer: VIA Labs, Inc.
usb 2-4: SerialNumber: 000000000
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
audit: type=1451 audit(1730383972.654:2): status=2 old_status=4 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
audit: type=1450 audit(1730383972.654:3): status=0 old_status=2 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
audit: type=1457 audit(1730383972.654:4): status=2 old_status=0 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
audit: type=1452 audit(1730383972.658:5): status=0 old_status=1 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
audit: type=1454 audit(1730383972.658:6): status=0 old_status=1 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
audit: type=1458 audit(1730383972.658:7): status=1 old_status=0 loginuid=4294967295 uid=0 gid=0 session=4294967295 res=warn
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3: new high-speed USB device number 4 using xhci_hcd
systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4kylin3.15k0.26 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-3: New USB device found, idVendor=2109, idProduct=2211, bcdDevice= 5.60
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
usb 1-3: Manufacturer: VIA Labs, Inc.
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
systemd[1]: Configuration file /lib/systemd/system/xdxgpu-config.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Configuration file /lib/systemd/system/serviceavserver.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Configuration file /lib/systemd/system/CloseApp.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: root.mount: Unit is bound to inactive unit dev-sda5.device. Stopping, too.
systemd[1]: data.mount: Unit is bound to inactive unit dev-sda5.device. Stopping, too.
systemd[1]: boot.mount: Unit is bound to inactive unit dev-sda2.device. Stopping, too.
systemd[1]: home.mount: Unit is bound to inactive unit dev-sda5.device. Stopping, too.
systemd[1]: boot-efi.mount: Unit is bound to inactive unit dev-sda1.device. Stopping, too.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting update duration after shutdown or reboot...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished update duration after shutdown or reboot.
EXT4-fs (sda3): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Init netctl and process protect value to kernel...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Condition check resulted in VMware vmblock fuse mount being skipped.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started Journal Service.
usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=046d, idProduct=c31d, bcdDevice=51.10
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Keyboard
usb 1-2.2: Manufacturer: Logitech
ccp 0000:03:00.2: enabling device (0000 -> 0002)
ccp 0000:03:00.2: no command queues available
ccp 0000:04:00.1: enabling device (0000 -> 0002)
ccp 0000:04:00.1: ccp enabled
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:03:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C31D.0002/input/input3
usb 1-4: new high-speed USB device number 6 using xhci_hcd
hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.3-2.2/input0
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:03:00.3/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31D.0003/input/input4
Adding 9751548k swap on /dev/sda6. Priority:-2 extents:1 across:9751548k SSFS
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:03:00.3/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31D.0003/input/input5
hid-generic 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.3-2.2/input1
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 1-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 6.20
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0 Hub
usb 1-4: Manufacturer: VIA Labs, Inc.
usb 1-4: SerialNumber: 000000000
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-2.3: new low-speed USB device number 7 using xhci_hcd
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 1-2.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell MS116 USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:03:00.3/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:301A.0004/input/input6
hid-generic 0003:413C:301A.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:03:00.3-2.3/input0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver snd-usb-audio
bpfilter: Loaded bpfilter_umh pid 1251
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
blk load period jiffies over
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
jiffies: 4294893773, last: 4294894523, mode: 1, load: 33881263
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4294894525, last: 4294894523, mode: 0, load: 2094360
jiffies: 4294894949, last: 4294895699, mode: 1, load: 31470273
ukui-panel[3596]: segfault at 18 ip 00007fe8d2b51424 sp 00007ffde0b6bf58 error 4 in libQt5DBus.so.5.12.12[7fe8d2b30000+6d000]
Code: f8 48 8b 4a 78 48 89 0f 8b 11 83 c2 01 83 fa 01 77 04 c3 0f 1f 00 f0 83 01 01 c3 90 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 8b 56 08 48 89 f8 48 8b 8a 88 00 00 00 48 89 0f 8b 11 83 c2 01
jiffies: 4294895852, last: 4294895842, mode: 0, load: 381967
st: Version 20160209, fixed bufsize 32768, s/g segs 256
systemd-journald[625]: Received client request to flush runtime journal.
jiffies: 4294973672, last: 4294974422, mode: 2, load: 33538560
jiffies: 4294974424, last: 4294974422, mode: 0, load: 0
jiffies: 4294984272, last: 4294985022, mode: 1, load: 33167000
jiffies: 4294985037, last: 4294985034, mode: 0, load: 768
jiffies: 4295017440, last: 4295018190, mode: 2, load: 36234256
jiffies: 4295018378, last: 4295018378, mode: 0, load: 0
jiffies: 4295039450, last: 4295040200, mode: 2, load: 34811904
jiffies: 4295040201, last: 4295040200, mode: 0, load: 0
jiffies: 4295047137, last: 4295047887, mode: 2, load: 33171895
jiffies: 4295047888, last: 4295047887, mode: 0, load: 772888
jiffies: 4295209113, last: 4295209863, mode: 2, load: 37097472
jiffies: 4295209873, last: 4295209863, mode: 0, load: 1184
PM: suspend entry (deep)
Filesystems sync: 0.008 seconds
xdxgpu 0000:02:00.0: xdxgpu: pm notifier: val=3
sysctl (33380): drop_caches: 3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_prepare: no implemented
serial 00:02: disabled
xdxgpu 0000:02:00.0: xdxgpu: init snapshot heap info: max=4
xdxgpu 0000:02:00.0: xdxgpu: init snapshot heap info: gpu local
xdxgpu 0000:02:00.0: xdxgpu: init snapshot heap info: gpu mmu
xdxgpu 0000:02:00.0: xdxgpu: init snapshot heap info: gpu dc
xdxgpu 0000:02:00.0: xdxgpu: snapshot save heapCnt=3 dmaRd=1
sd 7:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sda] Stopping disk
pci 0000:02:00.1: Refused to change power state, currently in D0
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
ACPI: \_SB_.C002: Found 2 idle states
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
ACPI: \_SB_.C004: Found 2 idle states
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
ACPI: \_SB_.C006: Found 2 idle states
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
ACPI: \_SB_.C008: Found 2 idle states
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
ACPI: \_SB_.C00A: Found 2 idle states
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0xc
ACPI: \_SB_.C00C: Found 2 idle states
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0xe
ACPI: \_SB_.C00E: Found 2 idle states
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x1
ACPI: \_SB_.C001: Found 2 idle states
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x3
ACPI: \_SB_.C003: Found 2 idle states
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x5
ACPI: \_SB_.C005: Found 2 idle states
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x7
ACPI: \_SB_.C007: Found 2 idle states
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x9
ACPI: \_SB_.C009: Found 2 idle states
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0xb
ACPI: \_SB_.C00B: Found 2 idle states
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0xd
ACPI: \_SB_.C00D: Found 2 idle states
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0xf
ACPI: \_SB_.C00F: Found 2 idle states
CPU15 is up
ACPI: Waking up from system sleep state S3
pci 0000:02:00.1: enabling device (0000 -> 0002)
sd 7:0:0:0: [sda] Starting disk
serial 00:02: activated
xdxgpu 0000:02:00.0: xdxgpu: snapshot restore heapCnt=3 dmaWr=0
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
irq 9: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.4.18-85-generic #74-KYLINOS
Source Version: 6a0b9a0cfc05c61fa574d210514afb8a33b1307e
Hardware name: THTF ChaoXiang Series/THTF-HG3250-1W-MH3A, BIOS BA1.H1.ZT.019.220314.R 03/14/2022
Call Trace:
dump_stack+0x6d/0x9a
__report_bad_irq+0x3a/0xaf
note_interrupt.cold+0xb/0x61
handle_irq_event_percpu+0x73/0x80
handle_irq_event+0x3b/0x5a
handle_fasteoi_irq+0x9c/0x150
do_IRQ+0x55/0xf0
common_interrupt+0xf/0xf
RIP: 0010:native_safe_halt+0xe/0x10
Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d a6 54 4b 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 96 54 4b 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 ed 63 5d ff 65
RSP: 0018:ffffffff83003d68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd8
RAX: 0000000080004000 RBX: 0000000000000001 RCX: 0000000000000034
RDX: 4ec4ec4ec4ec4ec5 RSI: ffffffff831624a0 RDI: ffff9c9fac2df864
RBP: ffffffff83003d70 R08: 00000166792820a1 R09: 000000007fffffff
R10: ffff9c9faec2a800 R11: ffff9c9faec2a7e0 R12: ffff9c9fac2df800
R13: ffff9c9fac2df864 R14: 0000000000000001 R15: 0000000000000001
? acpi_safe_halt+0x1f/0x30
acpi_idle_do_entry+0x2f/0x40
acpi_idle_enter+0xed/0x2b0
cpuidle_enter_state+0x7d/0x450
cpuidle_enter+0x2e/0x40
call_cpuidle+0x23/0x40
do_idle+0x1dd/0x270
cpu_startup_entry+0x20/0x30
rest_init+0xae/0xb0
arch_call_rest_init+0xe/0x1b
start_kernel+0x54e/0x56f
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x8f/0x93
secondary_startup_64+0xa4/0xb0
handlers:
[] acpi_irq
Disabling IRQ #9
xdxgpu 0000:02:00.0: xdxgpu: SMMU _xdx_smmu_tcu_resume() 458:tcu:0 resumed.
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_complete: no implemented
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
------------[ cut here ]------------
[CRTC:105:crtc-0] vblank wait timed out
WARNING: CPU: 11 PID: 2521 at drivers/gpu/drm/drm_atomic_helper.c:1467 drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Modules linked in: st xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter input_leds joydev snd_usb_audio snd_usbmidi_lib snd_hwdep snd_seq_midi snd_seq_midi_event snd_rawmidi edac_mce_amd kvm_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel k10temp i2c_piix4 ccp sch_fq_codel vmwgfx ttm parport_pc ppdev lp parport ip_tables x_tables autofs4 nls_iso8859_1 multipath linear hid_generic usbhid hid xdxgpu(OE) drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops glue_helper crypto_simd cryptd drm ahci libahci r8168(OE) mac_hid
CPU: 11 PID: 2521 Comm: Xorg Tainted: G OE 5.4.18-85-generic #74-KYLINOS
Source Version: 6a0b9a0cfc05c61fa574d210514afb8a33b1307e
Hardware name: THTF ChaoXiang Series/THTF-HG3250-1W-MH3A, BIOS BA1.H1.ZT.019.220314.R 03/14/2022
RIP: 0010:drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Code: 00 00 48 83 c7 08 e8 9f 56 15 c1 45 85 ff 0f 85 cc fe ff ff 49 8b 54 24 20 41 8b 74 24 60 48 c7 c7 a0 09 7b c0 e8 fb 14 10 c1 0b e9 af fe ff ff e8 c4 11 10 c1 0f 1f 40 00 0f 1f 44 00 00 f6
RSP: 0018:ffffbc4581e8fa78 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff9c9faeed8200
RBP: ffffbc4581e8faf0 R08: 00000000000004da R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9c9f9b5ea000
R13: ffff9c9ec8e5eb40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9558916a40(0000) GS:ffff9c9faeec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f87a000b270 CR3: 000000045f366000 CR4: 00000000003406e0
Call Trace:
? wait_woken+0x80/0x80
drm_atomic_helper_commit_tail+0x5a/0x70 [drm_kms_helper]
xdx_dm_atomic_commit_tail_rpm+0x72/0x80 [xdxgpu]
commit_tail+0x99/0x110 [drm_kms_helper]
drm_atomic_helper_commit+0x118/0x120 [drm_kms_helper]
xdx_dm_atomic_commit+0x81/0x90 [xdxgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_connector_commit_dpms+0xdf/0x100 [drm]
drm_mode_obj_set_property_ioctl+0x156/0x2a0 [drm]
? drm_connector_set_obj_prop+0x90/0x90 [drm]
drm_connector_property_set_ioctl+0x3b/0x60 [drm]
drm_ioctl_kernel+0x9f/0xf0 [drm]
? ____sys_recvmsg+0xa4/0x170
drm_ioctl+0x234/0x3d0 [drm]
? drm_connector_set_obj_prop+0x90/0x90 [drm]
xdx_fops_ioctl+0xd8/0x100 [xdxgpu]
do_vfs_ioctl+0x407/0x670
? __audit_syscall_entry+0xdb/0x120
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x57/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f9558c753db
Code: 0f 1e fa 48 8b 05 b5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 85 7a 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef5f930c8 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9558c753db
RDX: 00007ffef5f93100 RSI: 00000000c01064ab RDI: 000000000000000e
RBP: 00007ffef5f93100 R08: 0000564794728ad0 R09: 00005647932f2be8
R10: 0000000000000000 R11: 0000000000003246 R12: 00000000c01064ab
R13: 000000000000000e R14: 0000000000000000 R15: 0000564792ab79c0
---[ end trace fab7133e0a8a1f61 ]---
------------[ cut here ]------------
[CRTC:105:crtc-0] vblank wait timed out
WARNING: CPU: 11 PID: 2521 at drivers/gpu/drm/drm_atomic_helper.c:1467 drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Modules linked in: st xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter input_leds joydev snd_usb_audio snd_usbmidi_lib snd_hwdep snd_seq_midi snd_seq_midi_event snd_rawmidi edac_mce_amd kvm_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel k10temp i2c_piix4 ccp sch_fq_codel vmwgfx ttm parport_pc ppdev lp parport ip_tables x_tables autofs4 nls_iso8859_1 multipath linear hid_generic usbhid hid xdxgpu(OE) drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops glue_helper crypto_simd cryptd drm ahci libahci r8168(OE) mac_hid
CPU: 11 PID: 2521 Comm: Xorg Tainted: G W OE 5.4.18-85-generic #74-KYLINOS
Source Version: 6a0b9a0cfc05c61fa574d210514afb8a33b1307e
Hardware name: THTF ChaoXiang Series/THTF-HG3250-1W-MH3A, BIOS BA1.H1.ZT.019.220314.R 03/14/2022
RIP: 0010:drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Code: 00 00 48 83 c7 08 e8 9f 56 15 c1 45 85 ff 0f 85 cc fe ff ff 49 8b 54 24 20 41 8b 74 24 60 48 c7 c7 a0 09 7b c0 e8 fb 14 10 c1 0b e9 af fe ff ff e8 c4 11 10 c1 0f 1f 40 00 0f 1f 44 00 00 f6
RSP: 0018:ffffbc4581e8fa80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff9c9faeed8200
RBP: ffffbc4581e8faf8 R08: 000000000000050c R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9c9f9b5ea000
R13: ffff9c9ec8e5eb40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9558916a40(0000) GS:ffff9c9faeec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f87a000b270 CR3: 000000045f366000 CR4: 00000000003406e0
Call Trace:
? wait_woken+0x80/0x80
drm_atomic_helper_commit_tail+0x5a/0x70 [drm_kms_helper]
xdx_dm_atomic_commit_tail_rpm+0x72/0x80 [xdxgpu]
commit_tail+0x99/0x110 [drm_kms_helper]
drm_atomic_helper_commit+0x118/0x120 [drm_kms_helper]
xdx_dm_atomic_commit+0x81/0x90 [xdxgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_helper_legacy_gamma_set+0x114/0x160 [drm_kms_helper]
drm_mode_gamma_set_ioctl+0x15f/0x210 [drm]
? drm_mode_crtc_set_gamma_size+0xb0/0xb0 [drm]
drm_ioctl_kernel+0x9f/0xf0 [drm]
? enqueue_hrtimer+0x3d/0x90
drm_ioctl+0x234/0x3d0 [drm]
? drm_mode_crtc_set_gamma_size+0xb0/0xb0 [drm]
? copy_fpstate_to_sigframe+0x2e0/0x370
? recalc_sigpending+0x1c/0x60
xdx_fops_ioctl+0xd8/0x100 [xdxgpu]
do_vfs_ioctl+0x407/0x670
? __audit_syscall_entry+0xdb/0x120
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x57/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f9558c753db
Code: 0f 1e fa 48 8b 05 b5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 85 7a 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef5f92fa8 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005647934611f0 RCX: 00007f9558c753db
RDX: 00007ffef5f92fe0 RSI: 00000000c02064a5 RDI: 000000000000000e
RBP: 00007ffef5f92fe0 R08: 0000564793463610 R09: 0000564793463810
R10: 0000564793463610 R11: 0000000000003246 R12: 00000000c02064a5
R13: 000000000000000e R14: 00005647932f2be8 R15: 0000564793462f50
---[ end trace fab7133e0a8a1f62 ]---
blk load period jiffies over
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4295445375, last: 4295446125, mode: 2, load: 34066688
jiffies: 4295446135, last: 4295446125, mode: 0, load: 0
PM: suspend entry (deep)
Filesystems sync: 0.006 seconds
xdxgpu 0000:02:00.0: xdxgpu: pm notifier: val=3
sysctl (37757): drop_caches: 3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_prepare: no implemented
serial 00:02: disabled
xdxgpu 0000:02:00.0: xdxgpu: snapshot save heapCnt=3 dmaRd=1
sd 7:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
ACPI: \_SB_.C002: Found 2 idle states
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
ACPI: \_SB_.C004: Found 2 idle states
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
ACPI: \_SB_.C006: Found 2 idle states
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
ACPI: \_SB_.C008: Found 2 idle states
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
ACPI: \_SB_.C00A: Found 2 idle states
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0xc
ACPI: \_SB_.C00C: Found 2 idle states
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0xe
ACPI: \_SB_.C00E: Found 2 idle states
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x1
ACPI: \_SB_.C001: Found 2 idle states
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x3
ACPI: \_SB_.C003: Found 2 idle states
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x5
ACPI: \_SB_.C005: Found 2 idle states
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x7
ACPI: \_SB_.C007: Found 2 idle states
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x9
ACPI: \_SB_.C009: Found 2 idle states
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0xb
ACPI: \_SB_.C00B: Found 2 idle states
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0xd
ACPI: \_SB_.C00D: Found 2 idle states
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0xf
ACPI: \_SB_.C00F: Found 2 idle states
CPU15 is up
ACPI: Waking up from system sleep state S3
sd 7:0:0:0: [sda] Starting disk
serial 00:02: activated
xdxgpu 0000:02:00.0: xdxgpu: snapshot restore heapCnt=3 dmaWr=0
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
xdxgpu 0000:02:00.0: xdxgpu: SMMU _xdx_smmu_tcu_resume() 458:tcu:0 resumed.
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_complete: no implemented
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4295681689, last: 4295682439, mode: 2, load: 32085760
jiffies: 4295682439, last: 4295682439, mode: 0, load: 0
PM: suspend entry (deep)
Filesystems sync: 0.008 seconds
xdxgpu 0000:02:00.0: xdxgpu: pm notifier: val=3
sysctl (42616): drop_caches: 3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_prepare: no implemented
serial 00:02: disabled
xdxgpu 0000:02:00.0: xdxgpu: snapshot save heapCnt=3 dmaRd=1
sd 7:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
ACPI: \_SB_.C002: Found 2 idle states
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
ACPI: \_SB_.C004: Found 2 idle states
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
ACPI: \_SB_.C006: Found 2 idle states
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
ACPI: \_SB_.C008: Found 2 idle states
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
ACPI: \_SB_.C00A: Found 2 idle states
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0xc
ACPI: \_SB_.C00C: Found 2 idle states
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0xe
ACPI: \_SB_.C00E: Found 2 idle states
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x1
ACPI: \_SB_.C001: Found 2 idle states
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x3
ACPI: \_SB_.C003: Found 2 idle states
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x5
ACPI: \_SB_.C005: Found 2 idle states
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x7
ACPI: \_SB_.C007: Found 2 idle states
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x9
ACPI: \_SB_.C009: Found 2 idle states
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0xb
ACPI: \_SB_.C00B: Found 2 idle states
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0xd
ACPI: \_SB_.C00D: Found 2 idle states
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0xf
ACPI: \_SB_.C00F: Found 2 idle states
CPU15 is up
ACPI: Waking up from system sleep state S3
serial 00:02: activated
sd 7:0:0:0: [sda] Starting disk
xdxgpu 0000:02:00.0: xdxgpu: snapshot restore heapCnt=3 dmaWr=0
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
xdxgpu 0000:02:00.0: xdxgpu: SMMU _xdx_smmu_tcu_resume() 458:tcu:0 resumed.
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_complete: no implemented
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
blk load period jiffies over
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4295760472, last: 4295761222, mode: 2, load: 33572864
jiffies: 4295761244, last: 4295761234, mode: 0, load: 0
jiffies: 4295840890, last: 4295841640, mode: 2, load: 34062336
jiffies: 4295841650, last: 4295841640, mode: 0, load: 0
jiffies: 4295923138, last: 4295923888, mode: 2, load: 34946048
jiffies: 4295923897, last: 4295923888, mode: 0, load: 8
PM: suspend entry (deep)
Filesystems sync: 0.008 seconds
xdxgpu 0000:02:00.0: xdxgpu: pm notifier: val=3
sysctl (47442): drop_caches: 3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_prepare: no implemented
serial 00:02: disabled
xdxgpu 0000:02:00.0: xdxgpu: snapshot save heapCnt=3 dmaRd=1
sd 7:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
ACPI: \_SB_.C002: Found 2 idle states
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
ACPI: \_SB_.C004: Found 2 idle states
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
ACPI: \_SB_.C006: Found 2 idle states
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
ACPI: \_SB_.C008: Found 2 idle states
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
ACPI: \_SB_.C00A: Found 2 idle states
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0xc
ACPI: \_SB_.C00C: Found 2 idle states
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0xe
ACPI: \_SB_.C00E: Found 2 idle states
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x1
ACPI: \_SB_.C001: Found 2 idle states
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x3
ACPI: \_SB_.C003: Found 2 idle states
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x5
ACPI: \_SB_.C005: Found 2 idle states
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x7
ACPI: \_SB_.C007: Found 2 idle states
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x9
ACPI: \_SB_.C009: Found 2 idle states
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0xb
ACPI: \_SB_.C00B: Found 2 idle states
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0xd
ACPI: \_SB_.C00D: Found 2 idle states
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0xf
ACPI: \_SB_.C00F: Found 2 idle states
CPU15 is up
ACPI: Waking up from system sleep state S3
sd 7:0:0:0: [sda] Starting disk
serial 00:02: activated
xdxgpu 0000:02:00.0: xdxgpu: snapshot restore heapCnt=3 dmaWr=0
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
xdxgpu 0000:02:00.0: xdxgpu: SMMU _xdx_smmu_tcu_resume() 458:tcu:0 resumed.
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_complete: no implemented
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
------------[ cut here ]------------
[CRTC:105:crtc-0] vblank wait timed out
WARNING: CPU: 14 PID: 2521 at drivers/gpu/drm/drm_atomic_helper.c:1467 drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Modules linked in: st xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter input_leds joydev snd_usb_audio snd_usbmidi_lib snd_hwdep snd_seq_midi snd_seq_midi_event snd_rawmidi edac_mce_amd kvm_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel k10temp i2c_piix4 ccp sch_fq_codel vmwgfx ttm parport_pc ppdev lp parport ip_tables x_tables autofs4 nls_iso8859_1 multipath linear hid_generic usbhid hid xdxgpu(OE) drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops glue_helper crypto_simd cryptd drm ahci libahci r8168(OE) mac_hid
CPU: 14 PID: 2521 Comm: Xorg Tainted: G W OE 5.4.18-85-generic #74-KYLINOS
Source Version: 6a0b9a0cfc05c61fa574d210514afb8a33b1307e
Hardware name: THTF ChaoXiang Series/THTF-HG3250-1W-MH3A, BIOS BA1.H1.ZT.019.220314.R 03/14/2022
RIP: 0010:drm_atomic_helper_wait_for_vblanks.part.0+0x260/0x270 [drm_kms_helper]
Code: 00 00 48 83 c7 08 e8 9f 56 15 c1 45 85 ff 0f 85 cc fe ff ff 49 8b 54 24 20 41 8b 74 24 60 48 c7 c7 a0 09 7b c0 e8 fb 14 10 c1 0b e9 af fe ff ff e8 c4 11 10 c1 0f 1f 40 00 0f 1f 44 00 00 f6
RSP: 0018:ffffbc4581e8fa78 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff9c9faef98200
RBP: ffffbc4581e8faf0 R08: 0000000000000668 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9c9f9b5ea000
R13: ffff9c9ead63a900 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9558916a40(0000) GS:ffff9c9faef80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff1b70c058 CR3: 000000045f366000 CR4: 00000000003406e0
Call Trace:
? wait_woken+0x80/0x80
drm_atomic_helper_commit_tail+0x5a/0x70 [drm_kms_helper]
xdx_dm_atomic_commit_tail_rpm+0x72/0x80 [xdxgpu]
commit_tail+0x99/0x110 [drm_kms_helper]
drm_atomic_helper_commit+0x118/0x120 [drm_kms_helper]
xdx_dm_atomic_commit+0x81/0x90 [xdxgpu]
drm_atomic_commit+0x4a/0x50 [drm]
drm_atomic_connector_commit_dpms+0xdf/0x100 [drm]
drm_mode_obj_set_property_ioctl+0x156/0x2a0 [drm]
? drm_connector_set_obj_prop+0x90/0x90 [drm]
drm_connector_property_set_ioctl+0x3b/0x60 [drm]
drm_ioctl_kernel+0x9f/0xf0 [drm]
? enqueue_hrtimer+0x3d/0x90
drm_ioctl+0x234/0x3d0 [drm]
? drm_connector_set_obj_prop+0x90/0x90 [drm]
? copy_fpstate_to_sigframe+0x2e0/0x370
? recalc_sigpending+0x1c/0x60
xdx_fops_ioctl+0xd8/0x100 [xdxgpu]
do_vfs_ioctl+0x407/0x670
? __audit_syscall_entry+0xdb/0x120
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x57/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f9558c753db
Code: 0f 1e fa 48 8b 05 b5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 85 7a 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef5f92f88 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9558c753db
RDX: 00007ffef5f92fc0 RSI: 00000000c01064ab RDI: 000000000000000e
RBP: 00007ffef5f92fc0 R08: 00005647939e5760 R09: 00005647932f2be8
R10: 0000000000000000 R11: 0000000000003246 R12: 00000000c01064ab
R13: 000000000000000e R14: 00005647932f2be8 R15: 0000564793462f50
---[ end trace fab7133e0a8a1f63 ]---
blk load period jiffies over
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4296005420, last: 4296006170, mode: 2, load: 33462803
jiffies: 4296006172, last: 4296006170, mode: 0, load: 0
jiffies: 4296170389, last: 4296171139, mode: 2, load: 36885016
jiffies: 4296171148, last: 4296171139, mode: 0, load: 0
PM: suspend entry (deep)
Filesystems sync: 0.006 seconds
xdxgpu 0000:02:00.0: xdxgpu: pm notifier: val=3
sysctl (51809): drop_caches: 3
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_prepare: no implemented
serial 00:02: disabled
xdxgpu 0000:02:00.0: xdxgpu: snapshot save heapCnt=3 dmaRd=1
sd 7:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
smpboot: CPU 8 is now offline
smpboot: CPU 9 is now offline
smpboot: CPU 10 is now offline
smpboot: CPU 11 is now offline
smpboot: CPU 12 is now offline
smpboot: CPU 13 is now offline
smpboot: CPU 14 is now offline
smpboot: CPU 15 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
ACPI: \_SB_.C002: Found 2 idle states
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
ACPI: \_SB_.C004: Found 2 idle states
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
ACPI: \_SB_.C006: Found 2 idle states
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x8
ACPI: \_SB_.C008: Found 2 idle states
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0xa
ACPI: \_SB_.C00A: Found 2 idle states
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0xc
ACPI: \_SB_.C00C: Found 2 idle states
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0xe
ACPI: \_SB_.C00E: Found 2 idle states
CPU7 is up
smpboot: Booting Node 0 Processor 8 APIC 0x1
ACPI: \_SB_.C001: Found 2 idle states
CPU8 is up
smpboot: Booting Node 0 Processor 9 APIC 0x3
ACPI: \_SB_.C003: Found 2 idle states
CPU9 is up
smpboot: Booting Node 0 Processor 10 APIC 0x5
ACPI: \_SB_.C005: Found 2 idle states
CPU10 is up
smpboot: Booting Node 0 Processor 11 APIC 0x7
ACPI: \_SB_.C007: Found 2 idle states
CPU11 is up
smpboot: Booting Node 0 Processor 12 APIC 0x9
ACPI: \_SB_.C009: Found 2 idle states
CPU12 is up
smpboot: Booting Node 0 Processor 13 APIC 0xb
ACPI: \_SB_.C00B: Found 2 idle states
CPU13 is up
smpboot: Booting Node 0 Processor 14 APIC 0xd
ACPI: \_SB_.C00D: Found 2 idle states
CPU14 is up
smpboot: Booting Node 0 Processor 15 APIC 0xf
ACPI: \_SB_.C00F: Found 2 idle states
CPU15 is up
ACPI: Waking up from system sleep state S3
sd 7:0:0:0: [sda] Starting disk
serial 00:02: activated
xdxgpu 0000:02:00.0: xdxgpu: snapshot restore heapCnt=3 dmaWr=0
usb 1-1: reset full-speed USB device number 2 using xhci_hcd
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
xdxgpu 0000:02:00.0: xdxgpu: SMMU _xdx_smmu_tcu_resume() 458:tcu:0 resumed.
xdxgpu 0000:02:00.0: xdxgpu: xdx_pmops_complete: no implemented
OOM killer enabled.
Restarting tasks ... done.
PM: suspend exit
enp1s0: 0xffffbc4580065000, 00:0b:2f:1c:10:f8, IRQ 41
r8168: enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
jiffies: 4296226610, last: 4296227360, mode: 1, load: 31652864
jiffies: 4296227438, last: 4296227438, mode: 0, load: 0
jiffies: 4296335387, last: 4296336137, mode: 2, load: 34755096
jiffies: 4296336140, last: 4296336137, mode: 0, load: 0
jiffies: 4296361303, last: 4296362053, mode: 1, load: 33477408
jiffies: 4296362287, last: 4296362286, mode: 0, load: 3452
jiffies: 4296390478, last: 4296391228, mode: 2, load: 32249856
jiffies: 4296391256, last: 4296391250, mode: 0, load: 0
jiffies: 4296417972, last: 4296418722, mode: 2, load: 32606592
jiffies: 4296418722, last: 4296418722, mode: 0, load: 0
PVR_K:(Error): 2521: _FreeSingleBaseArray() failed (PVRSRV_ERROR_INVALID_REQUEST) in _RA_FreeMultiUnlocked() [2816]
PVR_K:(Error): 2521: RA_FreeMulti() failed (PVRSRV_ERROR_INVALID_REQUEST) in _FreeLMPagesContig() [1763]
PVR_K:(Error): 2521: _FreeSingleBaseArray() failed (PVRSRV_ERROR_INVALID_REQUEST) in _RA_FreeMultiUnlocked() [2816]
PVR_K:(Error): 2521: RA_FreeMulti() failed (PVRSRV_ERROR_INVALID_REQUEST) in _FreeLMPagesContig() [1763]
jiffies: 4296583890, last: 4296584640, mode: 2, load: 36315137
jiffies: 4296584651, last: 4296584651, mode: 0, load: 0